7 - NRST PAGES152trolled airspace are also sectorized to provide completeinformation on any nearby airspace. Once one of thedescribed conditions exists, the message annunciatorflashes, alerting you of an airspace message (if airspacealert messages are enabled). See Sec 9 - Aux - Setup 1- CDI / Alarms for more information.To view an airspace alert message:1. When the message annunciator above theMSG key flashes, press MSG.Press MSG to view an airspace alert message.Press MSG again to remove the messagewindow and return to the previous page.2. Press MSG again to return to the previouspage.Once you have been provided an airspace alertmessage, detailed information concerning the specificairspace is provided on the Nearest Airspace Page.The Nearest Airspace Page displays the airspace name,status (“Ahead”, “Ahead < 2nm”, etc. as described onthe previous page), and a time to entry (if applicable).By selecting any airspace name listed on the NearestAirspace Page, additional details are provided —including controlling agency, communication frequen-cies and floor/ceiling limits.To view additional details for an airspace listedon the Nearest Airspace Page:1. Select the Nearest Airspace Page.Airspace NameStatus andTime to EntryMessageAnnunciatorEighth Pagein NRST Group2. Press the small right knob to activate thecursor.3. Turn the large right knob to scroll throughthe list, highlighting the desired airspace.STEP 3 & 4: From the Nearest Airspace Page,highlight the desired airspace and press ENTto display additional airspace information.4. Press ENT to display the Airspace InformationPage for the selected nearby airspace.5. To return to the Nearest Airspace Page, verifythat “Done?” is highlighted by the flashingcursor and press ENT.6. Press the small right knob to remove theflashing cursor.Nearest Airspaces
