3 - DIRECT-TO60Selecting by Facility or CitySelecting a Destination by Facility Name orCityIn addition to selecting a destination by identifier,the Select Direct-to Waypoint Page also allows you toselect airports, VORs and NDBs by facility name orcity location. If duplicate entries exist for the enteredfacility name or city, additional entries may be viewedby continuing to turn the small right knob duringthe selection process (see Sec 6 WPT Pages - Duplicatewaypoints for more information).Identifier, Symboland Region Flight PlanFieldFacility NameCityNearest AirportFieldTo select a direct-to destination by facility nameor city:1. Press the direct-to key. The Select Direct-toWaypoint Page appears, with the waypointidentifier field highlighted.Select the third line on the Select Direct-toWaypoint Page to choose your destinationwaypoint (airport, VOR, NDB) by city name.2. Turn the large right knob to highlight thefacility name (second line; see above) or thecity (third line; see above) field.3. Use the small and large right knobs to enterthe facility name or city location of the desireddestination waypoint. As you spell the facilityname or city, the 500W-series Spell’N’Findfeature selects the first entry in the databasebased upon the characters you have enteredup to that point.Use the small and large right knobs to enterthe city name. Continue turning the smallright knob to view any additional listings forthe selected city.4. Continue turning the small right knob toscroll through any additional database listingsfor the selected facility name or city. If you scrollpast the desired waypoint, you can also scrollbackwards with the small right knob.5. Press ENT to confirm the selected waypointand ENT (again) to activate the direct-to func-tion.
