13TAKEOFF TOURDefault NAV PageDefault NAV PageDuring most flights, the Default NAV, Map andNAVCOM pages are the primary pages used for navi-gation. The Default NAV Page displays a “look ahead”map, graphic course deviation indicator (CDI), theactive leg of your flight plan (as defined by the current“from” and “to” waypoints), and four user-selectabledata fields. The default settings for these fields are dis-tance to waypoint (DIS), desired track (DTK), groundspeed (GS) and estimated time en route (ETE). SeeSection 12 for definitions of these navigation terms.The default NAV page is selected by pressing and hold-ing the CLR key or turning the small right knob.From the Default NAV Page, simply turn thesmall right knob to display the available pages. TheNAVCOM Page displays the available frequencies(communication and navigation) for the departureairport, any en route airports that are included in yourflight plan, and the final destination airport. Whenusing the direct-to function, frequencies are listed forthe airport nearest to your starting position and thedestination airport.DEFAULT NAV PAGEActive Leg of Flight Plan,or Direct-to DestinationUser-selectable Data Fields(all four corners)Course DeviationIndicator (CDI)Bearing indicator tothe current activeTO waypointTo change the data fields in the corners of theDefault NAV Page:1. Press MENU (with the Map Page displayed).The data fields on the Default NAV Pagemay be custom-tailored to your prefer-ences. A menu selection is provided to“Change Fields?”.2. Turn the large right knob to highlight“Change Fields?” and press ENT.3. Turn the large right knob to highlight thedata field you wish to change.4. Turn the small right knob to select the typeof data you want to appear on this field andpress ENT.The large right knob is used to select thedata field you wish to change. Then usethe small right knob to display a list ofdata options and select the desired dataitem.5. Press the small right knob to remove thecursor.
