4 - FLIGHT PLANS74“Select Arrival?” and “Select Departure?”allow you to select and use published arrivalroutes (STARs) and published instrumentdepartures (SIDs).3. A window appears listing the available arrivalsfor your destination airport. Turn the smallright knob to select the desired arrival andpress ENT.4. A second window appears listing availabletransitions for the arrival. Turn the smallright knob to highlight the desired transitionwaypoint and press ENT.5. A third window appears listing available runwaysfor the arrival. Turn the small right knob tohighlight the desired runway and press ENT.Once the arrival or departure is selected, awindow appears to select the desired transi-tion waypoint.6. With “Load?” highlighted, press ENT. Thearrival is now inserted into your flight plan.Select DepartureSelect Departure? allows you to select a pub-lished standard instrument departure (SID) for thedeparture airport, or replace the current departurewith a new selection. When using a direct-to, the500W-series unit uses the nearest airport as a refer-ence when displaying available departures. (SeeSection 5 - Procedures for information on selectingdepartures using the PROC key.) Departures arenot available for all airports, in which case thedeparture windows will show “NONE.”To select a departure for the departure airport:1. From the Active Flight Plan Page, pressMENU to display the Active Flight Plan PageOptions.2. Highlight the “Select Departure?” option fromthe Active Flight Plan Page Options and pressENT.3. A window appears listing the available depar-tures for your departure airport. Turn the smallright knob to select the desired departure andpress ENT.4. A second window appears listing availabletransitions for the departure. Turn the smallright knob to highlight the desired transitionwaypoint and press ENT.5. A third window appears listing available run-ways for the departure. Turn the small rightknob to highlight the desired runway and pressENT.6. With “Load?” highlighted, press ENT. Thedeparture is now inserted into your flightplan.Active Flight Plan Options