![Garmin GNS 530W Pilot's Manual & Reference Manual pdf 192 page image](https://manuals-archive2.s3.amazonaws.com/3297311/26b16d4b0418699a8fbe57d60256c643192f.jpg)
9 - AUX PAGES1824. Press ENT to accept the selected offset.NOTE: When a local time offset is entered, youmust also select “Local 12 hour” or “Local 24hour” time format. The “UTC” time format settingignores any time offset entry.Display Backlight.To change the backlighting intensity:1. Select “Display Backlight” from the SetupPage.2. The flashing cursor highlights the backlight“Mode” field. Turn the small right knob toselect the desired mode: Auto or Manual. PressENT to accept the selection.3. If “Manual” is selected, the flashing cursormoves to the backlight “Level” field. Turn thesmall right knob to select the desired level.Press ENT to accept the selection.Nearest Airport CriteriaTo set the minimum runway length and runwaysurface:1. Select “Nearest Airport Criteria” from the SetupPage.2. The flashing cursor highlights the “RunwaySurface” field. Turn the small right knobto select the desired surface. The followingoptions are available:• Any surface• Hard surfaces Only• Hard / Soft surfaces• Water landings only3. Press ENT to accept the runway surface selec-tion.4. The flashing cursor moves to the minimumrunway length field. To enter a different mini-mum runway length, use the small and largeright knobs to enter the desired length. PressENT when finished.A runway length of “0”(or a very short length)will report all available runways.Setup 1 Page