Modem Configuration MenuEntries at the top of the Modem Configuration Menu display the status of the currentselections. Selections are made in the sections, labeled Modem Ports and ModemConfiguration File Name. Select the serial port that you want to activate and thenselect the modem configuration file for the modem on the port. To set up both serialports with modems, make your selections one port at a time.For information on choosing a modem configuration file, see “Sample ModemConfiguration Files” on page 325 and “Transfer of a Modem Session” on page 331.Modem Configuration MenuPort 1 Modem Configuration File Name:Port 2 Modem Configuration File Name:To make changes, First select the port and then the configuration filenameModem Ports:1. Serial port 12. Serial port 2Modem Configuration File Name:3. none 9. modem_m0_sp4. modem_f_sp 10. modem_m1_sp5. modem_f0_sp6. modem_f1_sp7. modem_z_sp8. modem_z0_sp30. Save configuration to NVRAM and Configure modem98. Return to Previous MenuSerial Port Selection MenuThis menu allows you to enable and/or disable the call-in functions of each serial port inany combination.Serial Port Selection Menu1. Serial Port 1 Call-Out:Currently Disabled2. Serial Port 2 Call-Out:Currently Disabled3. Serial Port 1 Call-In:Currently Disabled4. Serial Port 2 Call-In:Currently Disabled98. Return to Previous MenuChapter 7. Using the Service Processor 201
