Configure Nth Boot DeviceIn the description below, Nth can be 1st, 2nd, 3rd, and so on, depending on yourchoice on the previous menu.Options display a screen similar to the following:Configure Nth Boot DeviceDevice Current DeviceNumber Position Name1 1 Diskette2 2 Port E2 - 100/10 Ethernet Adapter (Integrated)3 Port E1 - 100/10 Ethernet Adapter Integrated)4 3 IDE CD-ROM5 4 SCSI 36.4 MB Hard Disk id=@0,0 (Integrated)6 ---------------------------------------------------------------------------------------------------Navigator keys:M = return to main menuESC key = return to previous screen X = eXit System Management Services--------------------------------------------------------------------------------------------------Type the number of the menu item and press Enter or Select a Navigator key: _Type the device number of the device name that you want to select as the Nth bootdevice. For example, if you entered this menu by selecting 4 on the previous menu(configure 2nd Boot Device), then enter the number 3 based on the list shown above.You are thus selecting the SCSI CD-ROM device to be the 2nd (Nth) device in the bootsequence.250 Service Guide
