Hot-Swap Fan AssemblyThe following procedures cover removal and replacement of the hot-swap fanassemblies.Note: You do not need to turn off the power to the system to replace a hot-swap fanassembly.The following illustration shows the replacement of a hot-swap fan assembly. Refer tothis illustration while performing the steps in this procedure.1234567891011121 Hot-swap fan assembly 1 2 Fan assembly 1 LED3 Fan 1 release button 4 Hot-swap fan assembly 25 Fan assembly 2 LED 6 Fan 2 release button7 Fan assembly 3 LED 8 Hot-swap fan assembly 39 Fan 3 release latch 10 Fan assembly 4 LED11 Hot-swap fan assembly 4 12 Fan 4 release latchRemoval1. If your system is a Model 6C1 (rack mount), place the system in the service positionas described in “Placing the Model 6C1 in the Service Position” on page 255.Chapter 9. Removal and Replacement Procedures 301
