Return to the “Telephone Number Setup Menu” on page 202 to enter the actualtelephone numbers your server will use for reporting problems.Serial Port ConfigurationTo configure the serial port on an AIX system, run the following from an AIX console:1. Log in as root user.2. To determine if you have any serial ports already configured, type:lsdev -Cc ttyIf no serial ports are configured, none are listed. If you want to configure serialports that are not listed, continue with the remaining steps.3. Identify the serial port(s) with the modem(s).4. Type smit tty5. Select add tty6. Select RS2327. Select Baud rate 9600 or higher.8. Select login enable and set the flow control to RTS.9. Commit the selections and set up any other needed serial ports.10. Exit SMIT.Appendix C. Service Processor Setup and Test 323
