After choosing which adapter to use to ping the remote system, you must provide theaddresses needed to communicate with the remote system.Ping IP Address1. Client IP Address [129.132.4.20]2. Server IP Address [129.132.4.10]3. Gateway IP Address [129.132.4.30]4. Subnet Mask [255.255.255.0]5. Execute Ping--------------------------------------------------------------------------------------------------Navigator keys:M = return to main menuESC key = return to previous screen X = eXit System Management Services--------------------------------------------------------------------------------------------------Type the number of the menu item and press Enter or Select a Navigator key: _Change SCSI SettingsThis option allow you to view and change the addresses of the SCSI controllersattached to your system.SCSI Utilities1. Change Hardware Spin Up Delay2. Change SCSI Id--------------------------------------------------------------------------------------------------Navigator keys:M = return to main menuESC key = return to previous screen X = eXit System Management Services--------------------------------------------------------------------------------------------------Type the number of the menu item and press Enter or Select a Navigator key: _Select ConsoleThe Select Console Utility allows the user to select which console the user would like touse to display the SMS menus. This selection is only for the SMS menus and does notaffect the display used by the AIX operating system.Follow the instructions that display on the screen. To return to the SMS menu, press thenumber 1 key after the word keyboard displays and before the tone sounds.246 Service Guide
