CEC CageThe following procedures cover removal and replacement of the CEC cage.Removal1. If you have not already done so, shut down the system as described in “Stoppingthe System” on page 254.2. If you have not already done so, unplug the system power cables from the electricaloutlets.3. If your system is a Model 6C1 (rack mount), place the system in the service positionas described in “Placing the Model 6C1 in the Service Position” on page 255.4. If you have not already done so, remove the service access cover as described in“Covers” on page 258.5. Remove the processor and memory card cover as described in “Processor andMemory Card Cover” on page 264.6. Remove the processor cards as described in “Processor Card” on page 273.7. Remove the memory card as described in “Memory Card and Memory DIMMs” onpage 266.8. Remove the screws (6) and remove the CEC cage from the system board.ReplacementReplace in reverse order.Chapter 9. Removal and Replacement Procedures 265
