6 FUNCTIONS FOR TRANSMIT6-17DTMF Memory encoderDTMF tones are used for autopatching, controlling oth-er equipment, and so on. The transceiver has 16 DTMFmemory channels for storage of often-used DTMFcodes sequence of up to 24 digits.D Programming a DTMF codeSelect the desired frequency band. (p. 3-6)qOn the Mode selection screen, select the FM or DVwmode. (p. 3-17)• The DTMF encoder can be used in the FM or DV mode.Pushe MENU (C) one or more times to select the“M-3” screen (M-3 menu).• If your are operating in the DR mode, push MENU (C)once or twice to select the “D-2” screen (D-2 menu).Touch [DTMF](r D) to display the DTMF mode.• The “DTMF” screen is displayed.Touch [EDIT](t D) to display the “DTMF MEMORY”screen.Touch the desired channel to select.y• “d0” to “d9,” “dA” to “dD,” “d” and “d#” are selectable.Touch theu number or character to enter the desiredDTMF code.After entering the DTMF codes, touch [ENT](i D) tosave the channel, and return to the “DTMF MEMO-RY” screen.Touch [o ](D) or push MENU (C) to return to the“DTMF” screen.Left RightCenterDisplay The L, R, C or D in theinstructions indicate thepart of the controller.L: Left sideR: Right sideC: Center bottomD: Display (Touch screen)Move the cursorMove the cursorDelete a numberEnterCancel editTouch [ENT]Touch [EDIT]Touch [DTMF]Touch the channelExample “d0”