19 MAINTENANCE19-3Resetting the CPUD Partial resetPushq SET (C) to enter the Set mode.Touch the “Reset” item of the “Others” Set mode.w(Others > Reset)• If the specified item is not displayed, touch [∫] or [√](D)one or more times to select the page.Touch “Partial Reset.”eWhen the dialogue appears, touch “YES.”rThe transceiver displays "PARTIAL RESET," thentthe partial reset is completed.If you want to reset the operating parameters to theirdefault values (VFO frequency, VFO settings, menugroup’s contents) without clearing certain data, a par-tial reset can be performed as described below.Left RightCenterDisplayAfter performing the partial resetA Partial reset resets operating settings to their defaultvalues (VFO frequency, VFO settings, menu contents)without clearing the items listed below:• Memory channel contents (Section 4)• Repeater list (p. 9-28)• Call sign memories (p. 9-45)• TX Message data (p. 9-2)• GPS Memory contents (p. 10-7)• GPS Message data (p. 10-17)• Programmed user band edge frequencies (p. 3-14)• Memory keyer contents (p. 4-6)• DTMF memories (p. 6-17)• RTTY memories (p. 4-18)• REF Adj (Reference frequency) setting (p. 17-22)The L, R, C or D in theinstructions indicate thepart of the controller.L: Left sideR: Right sideC: Center bottomD: Display (Touch screen)
