Icom IC-7100 Advanced Instructions

Also see for IC-7100: Finger touch operation Specification Basic Manual Service manual Instruction manual

Contents

Icom IC-7100 Advanced Instructions Manual pdf 331 page image

17 SET MODE17-28TX Call Sign Display (Default: Your Call Sign)Display > TX Call Sign Display (TX Call Sign Display)Select whether or not to display your own or the desti-nation station’s call sign while transmitting.• OFF: Does not display the call sign.• Your Call Sign: Displays and scrolls the destination’scall sign.When the called station’s call sign andname are programmed into memory,the transceiver shows the name afterthe call sign in any DV mode exceptfor the DR mode.• My Call Sign: Displays and scrolls your own callsign.Scroll Speed (Default: Fast)Display > Scroll Speed (Scroll Speed)This item sets the scrolling speed of the message, callsign, or other text, that is displayed on the transceiver'sLCD.• Slow: The speed is set to slow.• Fast: The speed is set to fast.VOICE TX Name Display (Default: ON)Display > VOICE TX Name Display (VOICE TX NameDisplay)Select whether or not to display the voice TX memoryname on the “Voice TX” screen.• OFF: Does not display the voice TX memory name.• ON: Displays voice TX memory name.Regardless of this setting, the voice TX memory nameis displayed on the “Voice TX RECORD” screen.KEYER Memory Display (Default: ON)Display > KEYER Memory Display (KEYER MemoryDisplay)Select whether or not to display the keyer memory con-tents on the “Keyer Send” screen.• OFF: Does not display the keyer memory contents.• OFF: Displays keyer memory contents.Opening Message (Default: ON)Display > Opening Message (Opening Message)Select whether or not display the opening message atpower ON.• OFF: Opening message display is skipped.• ON: Icom logo, MY call sign and the product model(“IC-7100”)* are displayed at power ON.Power ON Check (Default: ON)Display > Power ON Check (Power ON Check)Select whether or not to display the RF Power, RIT,Auto Power OFF condition when the transceiver is ac-tivated.When the RIT or Auto Power OFF is set to OFF, nodisplay is shown.• OFF: Does not display the RF Power, RIT, Auto PowerOFF condition.• ON: Displays the RF Power, RIT, Auto Power OFFcondition.Display Language (Default: English)Display > Display Language (Display Language)This item will appear only when “Japanese” is se-lected in System Language. See page 17-29“Choose your language carefully” about settingcautions.Set the screen display language type in the “TO” or“FROM” screen in the DR mode or the Set mode screento English or Japanese.System Language (Default: English)Display > System Language (System Language)Set the system language of the transceiver to Englishor Japanese.• English: The system language of the transceiver isEnglish.- Only alphabetical characters (A to Z, a toz, 0 to 9) and symbols (! " # $ % & ' ( ) * +, - . / : ; < = > ? @ [ \ ] ^ _ ` { | } ~) can bedisplayed.If Japanese characters (Kanji, Hiraganaand Katakana) are included, the LCDshows “=” or “_” instead of that character.In this case, you can only delete “=” or “_”in the transceiver's edit mode.- The Display Language item will be hid-den.• Japanese: The system language of the transceiver isJapanese.Kanji, Hiragana and Katakana characters,and the 2-bytes symbols can be displayedon the LCD.To display such characters in the “TO” or“FROM” screen in the DR mode or the Setmode screen, Display Language must beset to “Japanese.”Display Set mode (Continued)