5 FUNCTIONS FOR RECEIVE5-6The transceiver has 3 passband width IF filters for eachmode.The filter selection is automatically memorized ineach mode.The PBT shift frequencies are automatically memo-rized in each filter.D IF filter selectionOn the Mode selection screen, select the desiredqmode. (p. 3-17)Touch the Filter icon one or more times to select IFwfilter 1, 2 or 3.• The selected passband width and filter number is dis-played as the Filter icon.D Filter passband width setting(Mode: SSB/CW/RTTY/AM)On the Mode selection screen, select the desiredqmode. (p. 3-17)• Passband widths for FM, WFM and DV modes are fixed,and cannot be set.Touch the Filter icon for 1 second to display the “FIL-wTER” screen to set the filter passband width.Touch the Filter icon one or more times to select IFefilter 1, 2 or 3.Touch [BW](r D), then rotate the Dial to adjust the de-sired passband width. Then touch [BW](D) to set it.• If desired, touch [DEF](D) for 1 second to reset to thedefault setting.If desired, select another mode (any other than thetFM, WFM or DV), then repeat steps w and r.Pushy MENU (C) to exit the “FILTER” screen.Mode IF filter Adjustable range (steps)SSBFILTER1 (3.0 kHz)50 to 500 Hz (50 Hz)600 Hz to 3.6 kHz (100 Hz)FILTER2 (2.4 kHz)FILTER3 (1.8 kHz)SSB-DCWFILTER1 (1.2 kHz)50 to 500 Hz (50 Hz)600 to 3600 Hz (100 Hz)FILTER2 (500 Hz)FILTER3 (250 Hz)RTTYFILTER1 (2.4 kHz)50 to 500 Hz (50 Hz)600 to 2700 Hz (100 Hz)FILTER2 (500 Hz)FILTER3 (250 Hz)AMAM-DFILTER1 (9.0 kHz)200 Hz to 10 kHz (200 Hz)FILTER2 (6.0 kHz)FILTER3 (3.0 kHz)FMFM-DDVFILTER1 (15 kHz)FixedFILTER2 (10 kHz)FILTER3 (7.0 kHz)WFM FILTER (280 kHz) FixedIF filter selectionWhen FILTER2 or FILTER3 is selected in the FMmode, the TX modulation changes to the narrowmode (2.5 kHz).The PBT shift frequencies are cleared when thepassband width is changed.This “FILTER” screen graphically displays the PBTshift frequencies and passband width.• “FILTER” screen display• While adjusting the passband widthFilter iconPassband width and shift valueBlinks Highlighted HighlightedTouch [BW]Rotate the Dial toadjust the pass-band width, andthen touch [BW]Left RightCenterDisplay The L, R, C or D in theinstructions indicate thepart of the controller.L: Left sideR: Right sideC: Center bottomD: Display (Touch screen)
