|
9 D-STAR OPERATION 9-29D New repeater programmingRepeater group selection1.Pushq SET (C) to enter the Set mode.Touch the “Repeater List” item of the “DV Memory”wSet mode.DV Memory > Repeater List• If the specified item is not displayed, touch [∫] or [√](D)one or more times to select the page.• The repeater groups are displayed.e Touch [∫] or [√](D) to select the desired repeatergroup to be programmed.• The repeater list of the selected repeater group is dis-played.r Push QUICK (C).t Touch [Add] (D).• The “REPEATER LIST EDIT” screen is displayed.D Required items for the communication casesRepeater listcontentsUsed asan accessrepeaterUsed as adestinationrepeaterUsed for asimplex com-municationNAME – – –SUB NAME – – –CALL SIGN ✔ ✔ This item MUSTbe blank.GW CALLSIGN✔(For Gateway call) ✔ –GROUP – – –USE(FROM) ✔ – ✔FREQUENCY ✔ – ✔DUP ✔ – This item MUSTbe set to “OFF.”OFFSET FREQ ✔ – –POSITION – – –LATITUDE – – –LONGITUDE – – –UTC OFFSET – – –☞ Continued on the next page.* When you want to add a new repeater by editing a pro-grammed repeater memory contents, select “Edit.” In thiscase, after programming, be sure to select “<>.”If you select “<>,” the original repeater pro-grammed contents are overwritten.This section describes how to manually program newrepeater into the repeater list.The required setting items differ, depending on the re-peater use. Be sure to confirm the required items, asshown to the right.NOTE: To program a repeater into the repeater list,the repeater’s call sign MUST be entered.Repeater list programmingThe L, R, C or D in theinstructions indicate thepart of the controller.L: Left sideR: Right sideC: Center bottomD: Display (Touch screen)Left RightCenterDisplayTouch“DV Memory”Touch“Repeater List”Touch “Add”*Touchthe repeatergroup.(Example:11 Japan)Push QUICK
|
