Icom IC-7100 Advanced Instructions

Also see for IC-7100: Finger touch operation Specification Basic Manual Service manual Instruction manual

Contents

Icom IC-7100 Advanced Instructions Manual pdf 323 page image

17 SET MODE17-20Auto RepeaterFunction > SPLIT/DUP > Auto Repeater (Auto Repeat-er)This item appears only in the Korean and U.S.A. ver-sion transceivers.The auto repeater function automatically turns the du-plex operation and tone encoder* ON or OFF.The offset and repeater tone* are not changed by theauto repeater function. Reset these setting values, ifnecessary.For Korean versions• OFF: Turns the function OFF.• ON: Turns ON the duplex operation and tone encod-er*. (Default)For U.S.A. version• OFF: Turns the function OFF.• ON (DUP): Turns ON the duplex operationonly. (Default)• ON (DUP, TONE): Turns ON the duplex operation andtone encoder*.* The tone encoder will not be turned ON in the DV mode.Auto Start (Default: OFF)Function > Tuner > Auto Start (Tuner (Auto Start))Turn the Automatic Antenna Tuner function ON or OFFfor an external antenna tuner (like the optional AT-180).This function is for only the HF bands.• OFF: Tuning starts only when TUNER/CALL is pushed.• ON: The external antenna tuner automatically startstuning when the SWR is high, even if the tuneris turned OFF.PTT Start (Default: OFF)Function > Tuner > PTT Start (Tuner (PTT Start))When [PTT] is pushed after the operating frequency ischanged more than 1% from the last tuned frequency,the external antenna tuner (optional AH-4 or AT-180)automatically starts tuning.• OFF: Tuning starts only when TUNER/CALL is pushed.• ON : (AH-4) Automatically starts tuning when [PTT] ispushed on a new frequency, whether theexternal antenna tuner is ON or OFF(AT-180) Automatically starts tuning when [PTT]is pushed on a new frequency, only ifthe internal antenna tuner is ON[TUNER] Switch (Default: Auto)Function > Tuner > [TUNER] Switch ([TUNER] Switch)Select whether or not to store the AT-180’s status oneach band.When you change the operating frequency, this func-tion will automatically select the correct AT-180’s status,or you must do it manually.• Manual: You must manually change the AT-180’s sta-tus by pushing [TUNER].• Auto: The AT-180’s status memorized by the bandmemory is automatically selected. You canalso manually change it by pushing [TUN-ER].[SPEECH/LOCK] Switch (Default: SPEECH/LOCK)Function > [SPEECH/LOCK] Switch ([SPEECH/LOCK]Switch)Select the SPEECH switch action.• SPEECH/LOCK: Pushing SPEECH turns ON thevoice synthesizer function.Holding down SPEECH turns thedial lock function ON or OFF.• LOCK/SPEECH: Pushing SPEECH turns the dial lockfunction ON or OFF.Holding down SPEECH turns ONthe voice synthesizer function.Lock Function (Default: MAIN DIAL)Function > Lock Function (Lock Function)The dial lock function prevents frequency changes byaccidental movement of the tuning dial. The lock func-tion electronically locks the dial.• MAIN DIAL: When Lock Function is activated, theDial is disabled.• PANEL: When Lock Function is activated, thepanel is disabled.Functions except for [AF], [RF/SQL],[PWR], [SPEECH/LOCK] are inhibited.Memopad Numbers (Default: 5)Function > Memopad Numbers (Memopad Numbers)Set the number of usable memopad channels to either5 or 10.See page 11-13 for details.Function Set mode (Continued)