6 FUNCTIONS FOR TRANSMIT6-19D Transmitting DTMF code (Direct Input)Select the desired frequency band. (p. 3-6)qOn the Mode selection screen, select the FM or DVwmode. (p. 3-17)• The DTMF encoder can be used in the FM or DV mode.Pushe MENU (C) one or more times to select the“M-3” screen (M-3 menu).• If your are operating in the DR mode, push MENU (C)once or twice to select the “D-2” screen (D-2 menu).Touch [DTMF](r D) to display the DTMF mode.• The “DTMF” screen is displayed.Touch [SEND](t D) to open the DTMF send window.Touch “Direct Input” to display the “DTMF DIRECTyINPUT” screen.Touch theu number or character to enter the desiredDTMF code.When all digit are set, touch [TX](i D) to transmit thecode.• The transceiver automatically transmits the DTMF code.• While transmitting, touch [SEND], [EDIT] or [SET](D)or push MENU (C), SET (C) or XFC (R), cancels thetransmission.• After transmitting, transceiver returns to the “DTMF”screen.DTMF memory encoder (Continued)The DTMF code scrolls to theleft edge, and disappears everyone digit when the each digit issent.Highlightedwhile transmitting• While transmittingLeft RightCenterDisplay The L, R, C or D in theinstructions indicate thepart of the controller.L: Left sideR: Right sideC: Center bottomD: Display (Touch screen)Move the cursorMove the cursorDelete a numberTransmit the codeCancel editTouch [TX]Touch [SEND]Touch [DTMF]Touch“Direct Input”
