6 FUNCTIONS FOR TRANSMIT6-18D Transmitting DTMF codeTo transmit DTMF code using a DTMF send window,program the desired code in advance.Select the desired frequency band. (p. 3-6)qOn the Mode selection screen, select the FM or DVwmode. (p. 3-17)• The DTMF encoder can be used in the FM or DV mode.Pushe MENU (C) one or more times to select the“M-3” screen (M-3 menu).• If your are operating in the DR mode, push MENU (C)once or twice to select the “D-2” screen (D-2 menu).Touch [DTMF](r D) to display the DTMF mode.• The “DTMF” screen is displayed.Touch [SEND](t D) to open the DTMF send window.Touch the desired channel to transmit the DTMFycode.• The transceiver automatically transmits the selectedDTMF code.• While transmitting, touch [SEND], [EDIT] or [SET](D)or push MENU (C), SET (C) or XFC (R), cancels thetransmission.• After transmitting, transceiver returns to the “DTMF”screen.DTMF memory encoder (Continued)Left RightCenterDisplay The L, R, C or D in theinstructions indicate thepart of the controller.L: Left sideR: Right sideC: Center bottomD: Display (Touch screen)Touch [SEND]Touch [DTMF]The DTMF code scrolls to theleft edge, and disappears everyone digit when the each digit issent.Highlightedwhile transmittingTouch the DTMFchannelExample: d0• While transmitting
