4 RECEIVE AND TRANSMIT4-26Repeater operation (Continued)D Repeater access tone frequency settingSome repeaters require a subaudible tone to be ac-cessed. Subaudible tones are superimposed on yournormal signal and must be set first. You can select 50tones from 67.0 Hz to 254.1 Hz.In the FM mode, pushq MENU (C) one or more timesto select the “M-2” screen (M-2 menu).Touch [TONE](w D) one or more times to turn ON theTone encoder function.• “TONE” appears.• Touch [TONE](D) to toggle between “TONE,” “TSQL,”“DTCS” and OFF (icon disappears).Touch [TONE](e D) for 1 second to display the “TONE”screen.• “Repeater Tone” appears.Rotate the Dial to select the desired tone squelchrfrequency. See the table below.• If desired, touch [DEF] for 1 second to reset to the defaultsetting.Pusht MENU (C) to exit the “TONE” screen.Communicate in the normal way.y• Subaudible tones are superimposed on your transmit sig-nal.67.0 88.5 114.8 151.4 177.3 203.5 250.369.3 91.5 118.8 156.7 179.9 206.5 254.171.9 94.8 123.0 159.8 183.5 210.774.4 97.4 127.3 162.2 186.2 218.177.0 100.0 131.8 165.5 189.9 225.779.7 103.5 136.5 167.9 192.8 229.182.5 107.2 141.3 171.3 196.6 233.685.4 110.9 146.2 173.8 199.5 241.8• Selectable tone frequencies (Unit: Hz)Left RightCenterDisplay The L, R, C or D in theinstructions indicate thepart of the controller.L: Left sideR: Right sideC: Center bottomD: Display (Touch screen)Touch [TONE]for 1 secondRepeater tone iconTouch for 1 secondto reset to defaultTone frequency
