10 GPS/GPS-A OPERATION10-11Adding or editing GPS memory (Continued)D GPS group name programmingYou can register the name of each GPS group.Pushq SET (C) to enter the Set mode.Touch the “GPS MEMORY” item of the “GPS” Setwmode.GPS > GPS Memory• If the specified item is not displayed, touch [∫] or [√](D)one or more times to select the page.Touch the desired group for 1 second to edit betweenegroup “A” to “Z.”Touch “Edit Name.”r• The “GROUP NAME” screen is displayed to edit thegroup name.Enter the name touching the desired block one ortmore times to select the desired character, numberor symbol.• Touch “AB12” to toggle between the Alphabet inputand number input mode.• Touch [ [AB] ] and select “ab” to enter the lower case let-ters.• Touch [CLR](D) to delete the selected character, symbolor number.• Touch “ ” to input a space.Touch [y f](D) or [g](D) to move the cursor backwardand forward.Repeat stepsu t and y to program up to 16 charac-ters of a GPS group name (space included).Touch [ENT]i (D) when the programming is completed.• Returns to the “GPS MEMORY” screen.The L, R, C or D in theinstructions indicate thepart of the controller.L: Left sideR: Right sideC: Center bottomD: Display (Touch screen)Left RightCenterDisplayTouch for1 second.Name programmingMoves the cursor.Clears a character.Charactertype selection.Touch after enter-ing.Cancels andreturns to theprevious screen.SpaceCharacter type selection screenTouch [ab] to selectthe lower caseletters.Example;“Point 04”is entered.
