19 MAINTENANCE19-5Connect a mini plug cable to the [REMOTE] jack ofqthe master and sub transceivers.To [REMOTE]To [REMOTE]Mini plug cable(Purchase separately)Push [PWR]w (L) to turn ON the power, and thentouch the “Clone” item of the “Others” Set mode.(SET (C) > Others > Clone)Operate the master transceiver and sub transceivereas described below.Master transceiver’s operation:Touch the “Clone Master Mode.”When the dialogue “Go to the Clone Master Mode?”appears, touch “YES.”Sub transceiver’s operation:Touch the “Clone Mode.”When the dialogue “Go to the Clone Mode?” ap-pears, touch “YES.”Touch “OUT” on the master transceiver to start clon-ring.While cloning, the screen as show below is dis-played.Master transceiver’s screen:Sub transceiver’s screen:When cloning is finished, turn power OFF, then ONtagain to exit the cloning mode.• “CLONE END” appears automatically on the sub trans-ceiver’s display after the cloning is completed.Data cloningThe IC-7100 has data cloning capability.This function is useful when you want to copy all of theprogrammed contents from one IC-7100 to another.You can clone using an SD card, optional cloning soft-ware (CS-7100) or a mini plug cable (purchase sepa-rately).See page 13-15 for an SD card cloning.D Cloning between transceivers using a mini plug cable
