10 GPS/GPS-A OPERATION10-13D Moving a GPS dataYou can move programmed GPS memories to rear-range their display order in the selected GPS memorygroup.In order to move the GPS memory out of their assignedmemory group, edit and move, and then save.Pushq SET (C) to enter the Set mode.Touch the “GPS MEMORY” item of the “GPS” Setwmode.GPS > GPS Memory• If the specified item is not displayed, touch [∫] or [√](D)one or more times to select the page.Touch the group where the desired GPS memory toemove is stored.Touch the desired GPS memory for 1 second tormove.Example: Icom 02Touch “Move” and the “DESTINATION” screen dis-tplays.Select and touch between a GPS memory destina-ytion or “<>.”• If a GPS memory is touched, the desired memory ismoved up one position.• If “<>” is touched, the desired memory ismoved to the bottom of the group.Adding or editing GPS memory (Continued)The L, R, C or D in theinstructions indicate thepart of the controller.L: Left sideR: Right sideC: Center bottomD: Display (Touch screen)Left RightCenterDisplayHold down thememory tomove.Touch to selectthe memorygroup.Touch “Move.”Before the move.Select the desti-nation.BlinksAfter the move.“Icom 02 A” ismoved to thebottom.
