4 RECEIVE AND TRANSMIT4-9D Contest number Set modeThis mode is used to set the contest number, count uptrigger and Present number.• Setting contentsq In the CW mode, push MENU (C) one or more timesto select the “M-2” screen (M-2 menu).w Push [KEYER](D) to display the “KEYER SEND”screen.• If the “KEYER” (Root) screen is displayed, skip step e.Pushe MENU (C) to display the “KEYER” screen.Push [001](r D) to enter the “KEYER 001” (ContestNumber Set) screen.Touch the desired item to select.tTouch they desired option or rotate the Dial to changethe setting.• If desired, touch the item for 1 second to open the Defaultset window, then select “Default” to reset to the defaultsetting.Pushu MENU (C) to return to the “KEYER” (Root)screen.Electronic keyer functions (Continued)“KEYER” (Root) screen• Contest number Set modeNumber Style (Default: Normal)This item sets the numbering system used for contestnumbers— normal or short morse numbers.Short morse numbers are also referred to as “cut”numbers.• Normal: Does not use short morse numbers• 190➔ANO: Sets 1 as A, 9 as N and 0 as O.• 190➔ANT: Sets 1 as A, 9 as N and 0 as T.• 90➔NO: Sets 9 as N and 0 as O.• 90➔NT: Sets 9 as N and 0 as T.Count Up Trigger (Default: M2)Set the count-up trigger to one of four memory slots forthe contest number exchange. The count-up trigger al-lows the contest number to automatically advance aftereach complete number exchange is sent.• M1, M2, M3 or M4 can be set.Present Number (Default: 001)This item shows the current number for the count-uptrigger channel set above.• Touch [+] or [–](D) or rotate the Dial to change thenumber.• Hold down the item for 1 second to display the defaultset window, then touch “Default” to set the counter to“001.”• To the default setting• Default set windowThe L, R, C or D in the instructions indicate thepart of the controller.L: Left side, R: Right side, C: Center bottomD: Display (Touch screen)Touch [001]Touch the itemfor 1 second.Touch “Default.”Touch the item( Example: Num-ber Style)Touch the option( Example:190➔ANO)
