19 MAINTENANCE19-6Data cloning (Continued)D Cloning using a cloning softwareThe optional CS-7100 cloning software is also avail-able to clone/edit contents with a PC using ICF formatfiles.The programmed data can be write to the transceiverusing an SD card or a PC.This section describes how to write the programmeddata to the transceiver using an SD card.If you want to write the programmed data into the trans-ceiver using a PC, see the CS-7100 instruction manualfor details.Save the IC-7100’s setting data onto an SD card. (p.q13-6)(SET (C) > SD Card > Save Setting)Start-up the Windows that the CS-7100 is installed.wInsert the SD card in the PC.e• Insert the SD card into the SD card slot of the PC or theSD card reader.Double-click the CS-7100 shortcut icon on the desk-rtop to start the software.• After starting up, “Initial Setup” appears the first time.• To make the initial setup using the saved data on thecard, follow the steps as described in “Initial setup usingan SD card.” (p. 19-7)Click “t ” on the tool bar, or “Open...” in the Filemenu to show the data file selection screen. Selectthe ICF file, saved in step q, as described above.Set the desired settings in the CS-7100.y• Please refer to the Help file of the cloning software forassistance with the functions or settings.Click “u ” on the tool bar, or “Save As...” in the Filemenu to save the settings in an “icf” file format in a[Setting] folder on the card.Insert the SD card that includes the ICF file into theislot of the transceiver.Load the file to complete the cloning.o(SET (C) > SD Card > Load Setting)OpenSaveClick
