Icom IC-7100 Advanced Instructions

Also see for IC-7100: Finger touch operation Specification Basic Manual Service manual Instruction manual

Contents

Icom IC-7100 Advanced Instructions Manual pdf 91 page image

4 RECEIVE AND TRANSMIT4-29D Storing a non standard repeaterWhile the “M-1” menu is selected, touch [A/B](q D) toselect VFO A.Rotate the Dial to set the repeater output frequency.wTouch [A/B](e D) to select VFO B.Rotate the Dial to set the repeater input frequency.rt Push MENU (C) to display the “M-2” screen (M-2menu), then touch [TONE](D) to turn ON the previ-ously set tone encoder.y Push MENU (C) to display the “M-1” screen (M-1menu), then touch [A/B](D) to select VFO A.Touch [SPLIT](u D) to turn ON the Split function.Rotate [M-CH](i L) to select the desired memorychannel.• “BLANK” appears when a blank channel is selected.• Rotate [BANK](L) to select the desired bank, if needed.Touch [MW](o D) for 1 second to store the set con-tents into the selected memory channel.Repeater operation (Continued)Touch [A/B]Touch [SPLIT]Touch [MW] for1 secondLeft RightCenterDisplay The L, R, C or D in theinstructions indicate thepart of the controller.L: Left sideR: Right sideC: Center bottomD: Display (Touch screen)Touch [A/B]Touch [TONE]Push MENU (C)Push MENU (C)VFO ASplit iconVFO B“M-1” menu“M-1” menu“M-2” menu