10 GPS/GPS-A OPERATION10-14D GPS alarm settingA GPS alarm can sound when a target position comesinto the alarm area.This function can be set to the caller station, all GPSMemory channels, a specified Memory group or aspecified Memory channel.Adding or editing GPS memory (Continued)0.25’ 0.25’0.25’0.25’NYourpositionYourpositionExtended range(approx. 1 km; 1094 Y)Limited range(approx. 500m; 547Y)Beeps one timesBeeps three times Beeps three timesWhen all channels or group is selected:Alarm area 1 (Setting plural stations)When a specified memory is selected:Alarm area 2 (Setting specific station)Point APoint BPoint CExample: Alarm area (Group)Pushq SET (C) to enter the Set mode.Touch the “GPS ALARM” item of the “GPS” Setwmode.GPS > GPS Alarm• If the specified item is not displayed, touch [∫] or [√](D)one or more times to select the page.Touch “Alarm Select.”eTouch “Group,” and then “All Memories.”r• If you want to set the alarm to a GPS memory group,touch “(No Group)” or “A” to “Z.”Pusht SET (C) to exit the Set mode.• When either one of the stations in a specified group en-ters the set range, the beep sounds three times.• When the GPS alarm beeps, “GPS ALARM” pops up onthe screen and then the “ ” icon blinks.• To cancel the GPS alarm, repeat step r and select“Alarm OFF.”NOTE: When “All Memories”, “A” to “Z” or “(NoGroup)” is selected, the alarm sounds depend on the“Alarm Area (Group)” setting in the Set mode.GPS > GPS Alarm > Alarm Area (Group)Touch “Group.”Touch“All Memories.”“All Memories”is displayedBlinksThe pop up is dis-played and 3 beepssound.GPS beeping screen
