17 SET MODE17-11<>Voice Memo > QSO Recorder > <>Insert an SD card into the transceiver before select-ing this item.Touch [<>] to start voice recording.• “Recording started.” appears.• [<>] is displayed while recording.Once recording has started, the recording will con-tinue, even the transceiver is rebooted.To stop the recording, touch [<>].Play FilesVoice Memo > QSO Recorder > Play Files (PLAY FILES)Insert an SD card into the transceiver before select-ing this item.Do the following steps to play back the recorded audioon the SD card.Touch [Play Files], and folders on the SD card are dis-played.• These folders contain the stored files.Playing backTouch [q ∫] or [√], or rotate [DIAL] to select the folderthat includes the desired file to play back, and thentouch the folder.Touch [w ∫] or [√], or rotate [DIAL] to select the file toplay back, and then touch the file.• The VOICE PLAYER screen is displayed and the select-ed file is played back.• See “Operation while playing back” for forwording or re-winding. (p. 14-5)Pushe MENU or touch [] on the display to stop theplayback.• Returns to the file list screen.NOTE:• The folder name is automatically created, as shownin the example below:(Example) Recording date: 2013/3/1Folder name: 20130301• The file name is automatically created, as shown inthe example below:(Example) Recording date: 2013/3/1 15:30:00File name: 20130301_153000• The voice audio is recorded onto an SD card, andsaved in the “wav” format.The recorded voice audio can also be played backon a PC.The extension, “wav,” is not displayed on the trans-ceiver’s screen.REC Mode (Default: TX&RX)Voice Memo > QSO Recorder > Recorder Set > RECMode (REC Mode)Records both the transmitted and received audio as thedefault setting.• TX&RX: Records both the transmitted and receivedaudio.• RX Only: Records only the received audio.When transmitting while recordingWhen “OFF” is selected in File Split, the recording ispaused. After you stop transmitting, the recording re-sumes.When “ON” is selected in File Split, a new file is auto-matically created, and the transmitted audio is recordedinto the new one.RX REC Condition (Default: Squelch Auto)Voice Memo > QSO Recorder > Recorder Set > RXREC Condition (RX REC Condition)Select whether or not the squelch status affects the RXvoice audio recording.• Always: The transceiver always records the RXaudio regardless of the squelch sta-tus.• Squelch Auto: The transceiver records the RX audioonly when a signal is received (thesquelch is opened).When the squelch closes while record-ing, the recording will continue for 2seconds, and then pause.When “ON” is selected in File Split, and if the squelcheither opens or closes while recording, a new file isautomatically created.Voice Memo Set mode
