12 SCAN OPERATION12-5SCAN Speed (Default: Fast)Select the desired scan speed between slow and fast.• Slow: The scan is slower.• Fast: The scan is faster.SCAN Resume (Default: ON)Set the Scan Resume function ON or OFF.• OFF: When a signal is detected, the scan is can-celled.• ON: When a signal is received during a scan, thescan pauses for the set period of time in the“Pause Timer” setting, and then resumes.When the signal disappears, the scan resumesafter the set period of time in the “Resume Tim-er” setting.Pause Timer (Default: 10 sec)Select the scan Pause Timer.When a signal is received, the scan pauses accordingto this setting.When the “SCAN Resume” is set to “OFF,” this settingis invalid.• 2 to 20 sec: When a signal disappears while pausingthe scan for 2 to 20 seconds (in 2 sec-onds steps), the scan resumes accord-ing to the setting in the Resume Timer.• Hold: When receiving a signal, the scan paus-es and resumes when it disappears, ac-cording to the setting in Resume Timer.Resume Timer (Default: 2sec)Select the scan Resume Timer.When a received signal disappears, the scan resumesaccording to this setting.When the “SCAN Resume” is set to “OFF,” this settingis invalid.• 0 sec: The scan resumes immediately after thesignal disappears.• 1 to 5 sec: The scan resumes 1 to 5 seconds afterthe signal disappears.• Hold: The scan remains paused according tothe Pause Timer, even if the signal disap-pears.- Rotate the Dial to resume the scan.- When “Pause Timer” is set to 2 to 20seconds, the scan resumes, accordingto the “Pause Timer” setting.MAIN DIAL (SCAN) (Default: Up/Down)Select the function of the Dial while scanning.• OFF : Rotating the Dial cancels the scan.• Up/Down : Rotating the Dial changes the scanningdirection.Scan Set mode (Continued)
