Configuring the domain 101/cfg/domain #/server/tracefollowed by:You can read a saved TCP traffic dump fileusing the TCPDUMP or Ethereal application ona remote machine.The default output mode is interactive.ping Verifies station-to-station connectivity acrossthe network.• host is the host name or IP address of thetarget stationIf a backend interface is mapped to the currentNortel SNAS domain, the check is madethrough the backend interface. To map abackend interface to the domain, use the/cfg/domain #/adv/interface command(see “Configuring advanced settings” (page109)).To be able to use a host name, the DNSparameters must be configured (see“Configuring DNS servers and settings” (page276)).dnslookup Finds the IP address for a machine whosehost name you specify, or the host name of amachine whose IP address you specify.• host is the host name or IP address of themachineIf a backend interface is mapped to the currentNortel SNAS domain, the check is madethrough the backend interface. To map abackend interface to the domain, use the/cfg/domain #/adv/interface command(see “Configuring advanced settings” (page109)).traceroute Identifies the route used for station-to-stationconnectivity across the network.Nortel Secure Network Access SwitchUsing the Command Line InterfaceNN47230-100 03.01 Standard28 July 2008Copyright © 2007, 2008 Nortel Networks.
