288 Configuring system settingsStep Action1 In the RADIUS server dictionary, define a descriptive string (forexample, NSNAS-SSL-Audit-Trail).2 Map this string to the Vendor-Type value.--End--Configuring RADIUS auditingTo configure the Nortel SNAS to support RADIUS auditing, use thefollowing command:/cfg/sys/adm/auditThe Audit menu appears.The Audit menu includes the following options:/cfg/sys/adm/auditfollowed by:servers Accesses the RADIUS Audit Servers menu,in order to configure external RADIUS auditservers for the cluster (see “Managing RADIUSaudit servers” (page 289)).vendorid Corresponds to the vendor-specific attributeused by the RADIUS audit server to identifyevent log information from the Nortel SNAScluster.The default Vendor-Id is 1872 (Alteon).vendortype Corresponds to the Vendor-Type value usedin combination with the Vendor-Id to identifyevent log information from the Nortel SNAScluster.The default Vendor-Type value is 2(Alteon-ASA-Audit-Trail).ena Enables RADIUS auditing.The default is disabled.dis Disables RADIUS auditing.The default is disabled.Nortel Secure Network Access SwitchUsing the Command Line InterfaceNN47230-100 03.01 Standard28 July 2008Copyright © 2007, 2008 Nortel Networks.
