Configuring SNMP 335/cfg/sys/adm/snmp/eventfollowed by:addmonitor [ ] -x [present|absent| changed]Adds an existence monitor and trigger asdefined in the DISMAN-EVENT-MIB.Valid are:• -c —adds a comment• -f —the samplinginterval, in seconds. The default is 600(10 minutes).• -o —additional objects to sendin the event• -e —the name of anotification event• -d —the delta discontinuity OID• -D timeTicks|timeStamp|dateAndTime—the delta discontinuity typeOther parameters are:• name—a unique name you assign tothe monitor, for identification• OID—the object identifier (or symbolicname) to monitor• present|absent|changed—indicates whether the object being monitored ispresent, absent, or has changeddelmonitor Removes the specified monitor from theconfiguration.addevent [-c ] [ ]Adds a notification event as defined in theDISMAN-EVENT-MIB.• -c —adds a comment(optional)• name—a unique name you assign tothe event, for identification• notification—the OID (or symbolicname) of the notification• OID...—additional notification OIDs(optional)Nortel Secure Network Access SwitchUsing the Command Line InterfaceNN47230-100 03.01 Standard28 July 2008Copyright © 2007, 2008 Nortel Networks.
