Customizing the portal and logon 253/cfg/doamin #/linkset followed by:autorun true|false Specifies whether autorun support isenabled or disabled. The options are:• true—autorun is enabled• false—autorun is disabledIf enabled, all links defined for the linksetexecute automatically after the clienthas been authenticated. No links for thislinkset display on the portal Home tab.The default is disabled.For more information about the type oflinks you can configure, see “Linksets andlinks” (page 234).link Accesses the Link menu, in order tocreate or configure links for the linkset (see“Configuring links” (page 253)).To view existing linksets, press TABfollowing the link command.del Removes the linkset from the currentconfiguration.Configuring linksTo create and configure the links included in the linkset, use the followingcommand:/cfg/doamin #/linkset /link whereindex is an integer in the range 1 to 256 thatindicates the position of the link in thelinkset.When you first create the link, if you do not specify the index in thecommand, you will be prompted to enter the index or name. You mustenter the index for the new link. You will then be prompted to enter thefollowing parameters:Nortel Secure Network Access SwitchUsing the Command Line InterfaceNN47230-100 03.01 Standard28 July 2008Copyright © 2007, 2008 Nortel Networks.
