Customizing the portal and logon 255/cfg/doamin #/linkset /link followed by:type external|ftp Specifies the type of link. The options are:• external—directs the client to a webpage. The external link is not securedby the Nortel SNAS.• ftp—directs the client to a directory onan FTP file exchange serverThe default is external.The Link menu changes to include acommand corresponding to the specifiedlink type.ATTENTIONNortel Secure Network Access SwitchSoftware Release 1.6.1supportsexternal links only.external Accesses the External Settings menu, inorder to configure settings for the link (see“Configuring external link settings” (page255)).This command only if the link type isexternal.ftp Accesses the FTP Settings menu, in orderto configure settings for the link.This command only if the link type is ftp.del Removes the link from the currentconfiguration.Configuring external link settingsTo launch the wizard to configure settings for a link to an external webpage, use the following command:/cfg/doamin #/linkset /link /external/quickNortel Secure Network Access SwitchUsing the Command Line InterfaceNN47230-100 03.01 Standard28 July 2008Copyright © 2007, 2008 Nortel Networks.
