Configuring SNMP 327/cfg/sys/adm/snmp/snmpv2-mibfollowed by:sysContact Designates a contact person for themanaged Nortel SNAS cluster.• contact is a string specifying thedesignated contact person’s name,together with information about how tocontact this person.snmpEnable disabled|enabledEnables or disables generatingauthentication failure traps. The default isdisabled.Configuring the SNMP communityTo configure the community aspects of SNMP monitoring, use thefollowing command:/cfg/sys/adm/snmp/communityThe SNMP Community menu appears.The SNMP Community menu includes the following options:/cfg/sys/adm/snmp/communityfollowed by:read Specifies the monitor community namethat grants read access to the MIB. If youdo not specify a monitor community name,read access is not granted.The default monitor community name ispublic.write Specifies the control community name thatgrants read and write access to the MIB.If you do not specify a control communityname, neither read nor write access isgranted.trap Specifies the trap community name thataccompanies trap messages sent to theSNMP manager. If you do not specify atrap community name, the sending of trapmessages is disabled.The default trap community name is trap.Nortel Secure Network Access SwitchUsing the Command Line InterfaceNN47230-100 03.01 Standard28 July 2008Copyright © 2007, 2008 Nortel Networks.
