88 Configuring the domainYou can change the VLAN mappings when you add or modifythe network access devices (see “Configuring the networkaccess devices ” (page 64)). You specify the Red VLAN whenyou add the network access devices to the domain.The components created by the wizard depend on the selectionsyou made in the preceding steps. For example, the sampleoutput illustrates the following options:• an existing certificate (Certificate 1) is being used• no network access devices is being added• the test user is being created--End--Creating Domain 1Creating Certificate 1Creating Client Filter 1Name: nha_passedCreating Client Filter 2Name: nha_failedCreating Client Filter 3Name: nha_system_passedCreating Client Filter 4Name: nha_system_failedCreating Linkset 1Name: nha_passedThis Linkset just prints the Health Agent resultCreating Linkset 2Name: nha_failedThis Linkset just prints the Health Agent resultCreating Linkset 3Name: nha_system_passedThis Linkset just prints the Health Agent resultCreating Linkset 4Name: nha_system_failedThis Linkset just prints the Health Agent resultCreating Group 1Name: nhauserCreating Extended Profile 1Giving full access when health check passedCreating "green" vlan with id 110Creating Access rule 1Giving remediation access when health check failedCreating Extended Profile 2Not using SRS rule for user compliancy:Creating Authentication 1Adding user ’nha’ with password ’nha’Creating Group 2Nortel Secure Network Access SwitchUsing the Command Line InterfaceNN47230-100 03.01 Standard28 July 2008Copyright © 2007, 2008 Nortel Networks.
