Configuring authentication 183Table 34Configuring authentication methods/cfg/doamin #/aaa/auth #/radiusfollowed by:servers Accesses the RADIUS servers menu, inorder to manage the external RADIUS serversconfigured for the domain (see “ManagingRADIUS authentication servers” (page 184)).vendorid Specifies the vendor-specific attribute usedby the RADIUS server to send group namesto the Nortel SNAS. The default Vendor-Id is1872 (Alteon).To use a standard RADIUS attribute ratherthan the vendor-specific one, set the vendor IDto 0 (see also vendor type).ATTENTIONIf authproto is chapv2, the Vendor-Idmust be set to 311 (Microsoft).vendortype type>Specifies the Vendor-Type value used incombination with the Vendor-Id to identify thegroups to which the user belongs. The groupnames to which the vendor-specific attributepoints must match names you define on theNSNAS. The default is 1.If you set the vendor ID to 0 in order to use astandard RADIUS attribute (see vendor ID), setthe vendor type to a standard attribute type asdefined in RFC 2865. For example, to use thestandard attribute Class, set the vendor ID to 0and the vendor type to 25.domainid Specifies the vendor-specific attribute usedby the RADIUS server to send domain namesto the NSNAS. The default Vendor-Id is 1872(Alteon).ATTENTIONIf authproto is chapv2, considersetting the Vendor-Id for the domain to 10(MS-CHAP-Domain).Nortel Secure Network Access SwitchUsing the Command Line InterfaceNN47230-100 03.01 Standard28 July 2008Copyright © 2007, 2008 Nortel Networks.
