168 Configuring groups and profilesTo map a linkset to a group, access the Linksets menu from the Groupmenu. Use the following command:/cfg/doamin #/aaa/group #/linksetTo map a linkset to an extended profile, access the Linksets menu fromthe Extended Profile menu. Use the following command:/cfg/doamin #/aaa/group #/extend #/linksetThe Linksets menu appears.The Linksets menu includes the following options:Table 30Mapping linksets/cfg/doamin #/aaa/group #[/extend #]/linksetfollowed by:listLists the currently configured linksets by indexnumber.del Removes the linkset entry represented by thespecified index number. The index numbers of theremaining entries adjust accordingly.add Adds a linkset to the group or extended profile.The linkset on the portal page after the user hasbeen authenticated. You can add as many linksetsas you want.The Nortel SNAS assigns an index number to thelinkset name as you add the linkset to the list forthe group. The linksets display on the portal pagein the order of the index numbers.insert number> name>Inserts a linkset at a particular position in the list.The index numbers of existing linkset entries withthis index number and higher are incremented by1.move Moves a linkset entry up or down the list. Theindex numbers of the remaining entries adjustaccordingly.Figure 9 "Linksets menu commands" (page 169) shows a sample outputfor the /cfg/doamin #/aaa/group /linkset commandand commands on the Linksets menu.Nortel Secure Network Access SwitchUsing the Command Line InterfaceNN47230-100 03.01 Standard28 July 2008Copyright © 2007, 2008 Nortel Networks.
