Configuring the cluster 283/cfg/sys/admfollowed by:telnet on|off Enables or disables Telnet access for remotemanagement of the system. The options are:• on—Telnet access is enabled. If there areno entries in the Access List, all Telnetconnections are allowed. If there are anyentries in the Access List, only the specifiedmachines are allowed Telnet access.• off—All Telnet connections are rejected,including connections from machines in theAccess List.The default is off.For more information about the Access List,see “Configuring the Access List” (page 273).ssh on|off Enables or disables SSH access for remotemanagement of the system. The options are:• on—SSH access is enabled. If there areno entries in the Access List, all SSHconnections are allowed. If there are anyentries in the Access List, only the specifiedmachines are allowed SSH access.• off—all SSH connections are rejected,including connections from machines in theAccess List.The default is off.For more information about the Access List,see “Configuring the Access List” (page 273).srsadmin Accesses the SRS Admin menu, in orderto configure the SRS rules (see “EnablingTunnelGuard SRS administration” (page 284)).sshkeys Accesses the SSH Host Keys menu, in orderto manage SSH keys used by all Nortel SNAShosts in the cluster in accordance with theSingle System Image (SSI) concept (see“Configuring Nortel SNAS host SSH keys”(page 284)).redist It affects the switch in all domains.Values: yes and nodefault: noNortel Secure Network Access SwitchUsing the Command Line InterfaceNN47230-100 03.01 Standard28 July 2008Copyright © 2007, 2008 Nortel Networks.
