86 Configuring the domainUse existing certificate (no/1) [no]:Create a test certificate? (yes/no): noEnter server certificate.Paste the certificate and key, press Enter to create anew line, and then type "..." (without the quotationmarks) to terminate.>7 To create a test certificate:a At the prompt to create a test certificate, enter Yes.b When prompted, enter the required certificate information.For more information, see “Generating and submitting a CSR”(page 305).c To continue, go to Step 8.Use existing certificate (no/1) [no]:Create a test certificate? (yes/no): yesThe combined length of the following parameters may notexceed 225 bytes.Country Name (2 letter code):State or Province Name (full name):Locality Name (eg, city):Organization Name (eg, company):Organizational Unit Name (eg, section):Common Name (eg, your name or your server’s hostname):Email Address:Subject alternative name (blank or comma separatedlist of URI:, DNS:, IP:,email:):Valid for days [365]:Key size (512/1024/2048/4096) [1024]:8 Specify whether the SSL server uses chain certificates.Do you require chain certificates (yes/no) [no]:9 If you want to enable HTTP to HTTPS redirection, create aredirect server.Do you want an http to https redirect server (yes/no)[no]:10 Specify whether you want to add a network access devices tothe domain.Do you want to configure a switch? (yes/no) [no]:If you do want to add a network access devices, enter yes tolaunch the quick switch wizard. Go to step 11.Nortel Secure Network Access SwitchUsing the Command Line InterfaceNN47230-100 03.01 Standard28 July 2008Copyright © 2007, 2008 Nortel Networks.
