Supported traps 481Table 89Supported MIBs (cont’d.)MIB DescriptionSNMP-USER-BASED-SM-MIB The following group is implemented:• usmMIBBasicGroupWrite access to all objects in this MIB is turned off inVACM.SNMPv2-MIB A standard MIB implemented by all agents. The followinggroups are implemented:• snmpGroup• snmpSetGroup• systemGroup• snmpBasicNotificationsGroup• snmpCommunityGroupSNMP-VIEW-BASED-ACM-MIB The following group is implemented:• vacmBasicGroupWrite access to all objects in this MIB is turned off inVACM.Supported trapsTable 90 "Supported traps" (page 481) describes the traps supported bythe Nortel SNAS.Table 90Supported trapsTrap Name DescriptionauthenticationFailure Sent when the SNMP agent receives an SNMP messagewhich is not properly authenticated. This trap is disabledby default. To enable the trap through SNMP, set snmpEnableAuthenTraps to enabled or use the CLI command/cfg/sys/adm/snmp/snmpv2-mib/snmpenable.Defined in SNMPv2-MIB.coldStart Sent when the Nortel SNAS reboots.Defined in SNMPv2-MIB.isdAlarmCleared Sent when an alarm is cleared.Nortel Secure Network Access SwitchUsing the Command Line InterfaceNN47230-100 03.01 Standard28 July 2008Copyright © 2007, 2008 Nortel Networks.
