Steps 401Trying to retrieve fingerprint...failed.Error: "Failed to retrieve host key"Do you want to add ssh key? (yes/no) [no]:Red vlan id of Switch: 210Creating Switch 2Use apply to activate the new Switch.>> doamin ##Export the Nortel SNAS public SSH key to a TFTP server, for manualretrieval by the Ethernet Routing Switch 5500:>> Main# cfg/doamin #/sshkey/export tftp 10.20.20.20sac_key.1.pubImport the public SSH key from the switch:>> Main# cfg/doamin #/switch 2/sshkey/importMapping the VLANsThis example assumes that the VLANs defined on the Ethernet RoutingSwitch 8300(Switch 1) will always be used exclusively by Switch 1,whereas the VLAN IDs for the VLANs defined on the Ethernet RoutingSwitch 5510 (Switch 2) may be used by other edge switches added to thedomain in future. Therefore, the VLAN mappings for Switch 1 are madeat the switch-level command, while the VLAN mappings for Switch 2 aremade at the domain level.>> Main# cfg/doamin #/switch 1/vlan/add yellow 120>> Switch Vlan# add green 130>> Switch Vlan# ../../vlan/add yellow 220>> Domain Vlan# add green 230>> Domain Vlan# applyChanges applied successfully.Enabling the network access devices>> Main# cfg/doamin #/switch 1/ena>> Switch 1# ../switch 2/ena>> Switch 2# applyChanges applied successfully.Nortel Secure Network Access SwitchUsing the Command Line InterfaceNN47230-100 03.01 Standard28 July 2008Copyright © 2007, 2008 Nortel Networks.
