Configuring the cluster 275/cfg/sys/timefollowed by:tzone Specifies the time zone. You are promptedto enter a continent or ocean area, a country,and a region (if applicable). To view availableinput options, press Enter to accept the default(select) in order to display selection menusfor each item.ntp Accesses the NTP Servers menu, in order tomanage NTP servers used by the cluster (see“Managing NTP servers” (page 275)).Managing NTP serversYou can add NTP servers to the system configuration to enable the NTPclient on the Nortel SNAS to synchronize its clock. To compensate fordiscrepancies, it is recommended that NTP have access to at least threeNTP servers.To manage NTP servers used by the system, use the following command:/cfg/sys/time/ntpThe NTP Servers menu appears.The NTP Servers menu includes the following options:/cfg/sys/time/ntpfollowed by:list IP address information for all NTP serversconfigured for the system, by index number.del Removes the specified NTP server from thesystem configuration.• index number is the identification numberautomatically assigned to the server whenyou added the server to the configuration.To view the index numbers of all configuredNTP servers, use the list command.add Adds an NTP server to the systemconfiguration.• IPaddr is the IP address of the NTPserver.An index number is automatically assigned tothe server.Nortel Secure Network Access SwitchUsing the Command Line InterfaceNN47230-100 03.01 Standard28 July 2008Copyright © 2007, 2008 Nortel Networks.
