Making copies8912Adjusting Contrast andBrightness 12Contrast 12Adjust the contrast to help an image looksharper and more vivid.To temporarily change the contrast setting,follow the steps below:a Make sure you are in Copy mode.b Load your document.c Use the dial pad to enter the number ofcopies (up to 99).d Press Contrast/Quality.Press a or b to choose Contrast.Press OK.Contrast:-nnonn+cMode :AutoEnlg/Red:100%Tray :MP>T1Select d c & OK 01NoteT1 means Upper Tray and T2 meansLower Tray.e Press d or c to increase or decrease thecontrast.Press OK.f Press Start.To change the default setting follow the stepsbelow:a Press Menu, 3, 4.34.Contrast-nnonn+Select d c & OKb Press d or c to increase or decrease thecontrast.Press OK.c Press Stop/Exit.Brightness 12Adjust the copy brightness to make copiesdarker or lighter.To temporarily change the copy brightnesssetting, follow the steps below:a Make sure you are in Copy mode.b Load your document.c Use the dial pad to enter the number ofcopies (up to 99).d Press a or b to choose Bright.Mode :AutoEnlg/Red:100%Tray :MP>T1Bright :-nnonn+cSelect d c & OK 01NoteT1 means Upper Tray and T2 meansLower Tray.e Press c to make a lighter copy or pressd to make a darker copy.Press OK.f Press Start.To change the default setting follow the stepsbelow:a Press Menu, 3, 3.33.Brightness-nnonn+Select d c & OKb Press c to make a lighter copy or pressd to make a darker copy.Press OK.c Press Stop/Exit.
