Troubleshooting and routine maintenance161CChecking the remaining life ofparts CYou can see the remaining life of themachine's drum unit and periodicmaintenance parts on the LCD.a Press Menu, 8, 3.83.Parts Life1.Drum2.Fuser3.LaserSelect ab or OKb Press a or b to choose 1.Drum,2.Fuser, 3.Laser, 4.PF Kit MP,5.PF Kit 1 or 6.PF Kit 2 1 .Press OK.83.Parts Life1.DrumRemaining: XX%1 PF Kit 2 appears only when the optional6429913 tray is installed.c Press Stop/Exit.NoteThe life check will be accurate only if youhave reset the drum counter when youinstalled a new drum unit. It will not beaccurate if that part’s life counter wasreset during the life of the used part.Reset CThe following reset functions are available:1 NetworkYou can reset the print server back to itsdefault factory settings such as thepassword and IP address infromation.2 Address & FaxAddress & Fax resets the followingsettings: Dialer Setting(One Touch, Speed Dial and SetupGroups) Programmed fax jobs in the memory(Poll, Delayed send and DelayedBatch) Machine ID(Name and Number) Cover Message(Comments) Remote Fax Option(Remote Retrieval Passcode, FaxForwarding and PC-Fax) Report settings(Job Status Report, Dialer Dir and FaxJournal) Setting Lock Password3 All SettingsYou can reset all the machine settingsback to the settings that were set at thefactory.Océ strongly recommends you use thisoperation when you dispose of themachine.NoteUnplug the interface cable before you chooseNetwork or All Settings.
