Chapter 546Contrast 5For most documents the default setting ofAuto will give the best results. Itautomatically chooses the suitable contrastfor your document.If your document is very light or dark,changing the contrast may improve thequality of the fax.Use Dark to make the faxed documentlighter.Use Light to make the faxed documentdarker.a Make sure you are in Fax mode.b Load your document.c Press Menu, 2, 2, 1.22.TX Settings1.Contrasta Autob LightSelect ab or OKd Press a or b to choose Auto, Light orDark.Press OK.NoteEven if you choose Light or Dark, themachine will send the fax using the Autosetting if you choose Photo as the FaxResolution.Changing Fax Resolution 5The quality of a fax can be improved bychanging the Fax Resolution. Resolution canbe changed for the next fax or for all faxes.To change the Fax Resolution settingfor the next fax 5a Make sure you are in Fax mode.b Load your document.c Press Resolution, then a or b to choosethe resolution.Press OK.To change the default Fax Resolutionsetting 5a Make sure you are in Fax mode.b Press Menu, 2, 2, 2.22.TX Settings2.Resolutiona Standardb FineSelect ab or OKc Press a or b to choose the resolutionyou want.Press OK.NoteYou can choose four different resolutionsettings.Standard Suitable for most typeddocuments.Fine Good for small print and transmits alittle slower than Standard resolution.EX-Fine Good for small print or artworkand transmits slower than Fine resolution.Photo Use when the document hasvarying shades of gray or is a photograph.This has the slowest transmission time.
