Sending a fax475Dual access 5You can dial a number, and start scanning thefax into memory-even when the machine issending from memory, receiving faxes orprinting PC data. The LCD will show the newjob number.The number of pages you can scan into thememory will vary depending on the data thatis printed on them.NoteIf you get an Out of Memory messagewhile scanning the first page of a fax,press Stop/Exit to cancel scanning. If youget an Out of Memory message whilescanning a subsequent page, you canpress Start to send the pages scanned sofar, or press Stop/Exit to cancel theoperation.Real Time Transmission 5When you are sending a fax, the machine willscan the documents into the memory beforesending. Then, as soon as the telephone lineis free, the machine will start dialing andsending.If the memory is full, the machine will send thedocument in real time (even if TX from ADFis set to Off).Sometimes, you may want to send animportant document immediately, withoutwaiting for memory transmission. You can setTX from ADF to On for all documents orNext Fax:On for the next fax only.NoteIn Real Time Transmission, the automaticredial feature does not work when usingthe scanner glass.Sending in real time for all faxes 5a Make sure you are in Fax mode.b Press Menu, 2, 2, 5.22.TX Settings5.TX from ADFa Onb OffSelect ab or OKc Press a or b to choose On.Press OK.Sending in real time for the next faxonly 5a Make sure you are in Fax mode.b Press Menu, 2, 2, 5.22.TX Settings5.TX from ADFa Onb OffSelect ab or OKc Press a or b to choose Next Fax:On.Press OK.
