126Page skewed Make sure that the paper or other print media is loaded properly in thepaper tray and that the guides are not too tight or too loose againstthe paper stack. Set the paper guides correctly. (See Loading paper in the Upper Trayon page 10.) If you are using the MP tray, see Loading paper in the multi-purposetray (MP tray) on page 12. The paper tray may be too full. Check the paper type and quality. (See Acceptable paper and otherprint media on page 15.)Ghost Make sure that you use paper that meets our specifications. Rough-surfaced paper or thick paper may cause the problem. (SeeAcceptable paper and other print media on page 15.) Make sure that you choose the proper media type in the printer driveror in the machine’s Paper Type menu setting. (See Acceptable paperand other print media on page 15 and Basic tab in the SoftwareUser’s Guide.) The drum unit may be damaged. Put in a new drum unit. (SeeReplacing the drum unit on page 158.) The fuser unit may be contaminated. Call Océ Technical Support at1-800-243-5556 (in USA) or 1-866-462-4478 (in Canada).Wrinkles or creases Check the paper type and quality. (See Acceptable paper and otherprint media on page 15.) Make sure that paper is loaded properly. (See Loading paper in theUpper Tray on page 10.) Turn over the stack of paper in the tray or rotate the paper 180° in theinput tray.Examples of poor printqualityRecommendationABCDEFGHabcdefghijkA B C Da b c d e0 1 2 3 4B DEFGHabc efghijkA C Db c d e1 3 4
