Receiving a fax556Setting Receive TTI 6You can set the machine to print the receiveddate and time in the top center of eachreceived fax page.a Make sure you are in Fax mode.b Press Menu, 2, 1, 8.21.RX Settings8.Receive TTIa Onb OffSelect ab or OKc Press a or b to choose On or Off.Press OK.d Press Stop/Exit.Note• The received time and date will not appearwhen using Internet Fax.• Make sure you have set the current dateand time in the machine.Setting the Substitute RX 6When the paper tray is empty, toner is usedup or any other error occurs so that themachine cannot print, if you choose On,incoming faxes will be stored into memory. Ifyou choose Off, incoming fax calls will not beautomatically answered until the problemresolves.a Make sure you are in Fax mode.b Press Menu, 2, 1, 0.21.RX Settings0.Substitute RXa Onb OffSelect ab or OKc Press a or b to choose On (or Off).Press OK.d Press Stop/Exit.Receiving a fax at the end of aconversation 6At the end of a conversation you can ask theother party to send you a fax before you bothhang up.a Ask the other party to place thedocument in their machine and to pressthe Start or Send key.b When you hear the CNG tones (slowlyrepeating beeps), press Start.c Press 2 to receive a fax.d Replace the external handset.Printing a fax from thememory 6If you are using the Remote Retrieval or FaxForward feature (Menu, 2, 5, 1), you can stillprint a fax from the memory when you are atyour machine.a Press Menu, 2, 5, 2.25.Remote Fax Opt2.Print FaxPress Startb Press Start.c Press Stop/Exit.
