Basic Operation3-53Touch Panel DisplayDisplay for Originals and PaperThe touch panel displays the selected paper source and output tray.Display of keys that cannot be setKeys of features that cannot be used due to feature combination restrictions or non-installation of options are ina non-selectable state.NOTE: If a key that you wish to use is grayed out, the settings of the previous user may still be in effect. In thiscase, press the Reset key and try again.If the key is still grayed out after the Reset key is pressed, it is possible that you are prohibited from using thefunction by user control. Check with the administrator of the machine.Normal Grayed out HiddenIn the following cases, the key isgrayed out and cannot beselected.• Cannot be used incombination with a feature thatis already selected.• Use prohibited by user control.• [Preview] has been pressed.(Refer to Original Preview onpage 3-6)Cannot be used because anoption is not installed.Example:When a finisher is not installed,[Staple/Punch] does not appear.DuplexCopy ImageCopiesImage QualityOrg./Paper/FinishingQuick Setup Layout/Edit AdvancedSetupStatusShortcut 1Shortcut 4Shortcut 3Shortcut 2Shortcut 6Shortcut 5:::ProgramPress Start key to start printing.Press [Cancel] to change settings.CancelA4OriginalZoomPaper100%A410/10/2010 10:10Staple/PunchNormal 0DensityPaperSelectionAutoZoom100%Off1-sided>>1-sidedOffCombineOriginalpositionSize/orientation oforiginal and paperPapersourceOutputtrayRemaining amount of tonerStaple/PunchOffOffCombine Staple/PunchOffOffCombine Staple/PunchOffOffCombine
